High quality T-fitting used to add water filtration systems to existing setups. The mains connector attaches to the main line using a brass 1/2″ threaded female connection. The fitting has an a brass 1/2″ threaded male connection for attaching your current faucet and finally an integrated durable stop cock with 1/4″ Snaplock fittings for the water filtration system.

High quality John Guest fitting: 1/4″ x 1/4″ inline stop cock with Snaplock fittings. Perfect for turning on / off flow to your water filtration system.

1/4″ Snaplock fitting x 12mm threaded female fitting. This is an alternative fitting for attaching 1/4″ tubing to our Under-sink faucets, simply screw on the fitting to the thread of the faucet and attach the tubing, no need to use the included olive system when using this easy-install fitting.

All Thread Adapter (ATA) for Bench top systems. The ATA provides 2x male threaded connections for the diverter to attach to in the event that when the aerator is removed from the existing faucet, the connection is female – The ATA fits all standard faucet aerator connections.

High-pressure diverter for Bench top systems. The diverter features a 1/4″ barb with locking nut for connecting the Bench top system and a pull-out knob for diverting the water to the bench top; simply pull the knob.

Low-pressure diverter for Bench top systems. The diverter features a 1/4″ barb with locking nut for connecting the Bench top system and a plastic lever for controlling the water flow. Best suited for low-pressure.

The rubber diverter adaptor fits over non-standard sized taps, where the diverter or All Thread Adaptor does not screw into the faucet and allows for a bench top system diverter to be attached to the fitting.

Inlet barb for our Bench top systems. The new inlet barb features an L-shaped layout for tidier tube management and now includes an integrated locking nut to better hold the tubing in place. The inlet barb features 1/4″ threaded male connection for attaching to the Bench top and a 1/4″ barb with locking nut for attaching the tubing.

Pressure Limiting Valve (PLV) for under-sink systems being used in high water pressure areas. 7.5 LPM at 700 kpa (100 psi), Maximum pressure: 1600 kpa (230psi), Maximum temperature: 40 degrees Celsius. Install in between the mains and the inlet for your water filtration system.

1/4″ x 1/4″ x 1/4″ Snaplock T-Joiner. Perfect for joining 3x pieces of 1/4″ tubing together.

1/4″ x 1/4″ tube joiner (I-joiner) with Snaplock fittings. Perfect for joining 2 pieces of 1/4″ tubing together.